With the iBeacon or AltBeacon advertisement type enabled, you can make changes to the iBeacon and AltBeacon advertised values under the section labeled IBEACON/ALTBEACON. Setting the iBeacon and AltBeacon Advertisement Values Select the beacon proximity advertisement types that you want to have transmitted by this beacon device and apply your changes along with a valid PIN. You can change the beacon name by modifying the string value in the beacon text input field and applying your changes along with a valid PIN.įrom the beacon detail settings view, under Type, you will find a set of switches for each beacon advertisement type, including The beacon name is not transmitted as part of the proximity beacon advertisements and is only readable when the beacon is in configuration mode by a valid configuration tool like the RadBeacon configuration app. The beacon name is a simple string value that exists as a convenience for recognizing the beacon when you attempt to configure it in the future.
Setting the Eddystone URL Advertisement Values.Setting the Eddystone UID Advertisement Values.Setting the iBeacon and AltBeacon Advertisement Values.
#Radbeacon advertisement uuid update#
It is highly recommended to update your PIN to ensure that only authorized individuals may make changes to your beacon's configuration. For beacon models and versions that support an eight (8) digit PIN, the default PIN is '00000000'. You may change any or all of the modifiable settings, press Apply, and submit a valid PIN to update the settings for the RadBeacon.įor beacon models and versions that support a four (4) digit PIN, the default PIN is '0000'. In order to re-enter normal operational model, simply remove and replace power to the device.Once you've selected a beacon from the list of nearby configurable beacons, you will be shown the detailed Settings view. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured.
#Radbeacon advertisement uuid Bluetooth#
Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table.
Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.
0 kommentar(er)
